CRE Series Print E-mail

Specifications Sheet:

Dimensions
Base - Width of 6” x Length of 9.6”
Roller Width - 3”, 4”, or 6” rollers are available (see chart)
Total Height to Roller Centre - ranges from 8” to 12” (see chart)

Material
Base - 100% recycled rubber, UV resistant
Roller - rubber (cast iron galvanized rollers for 6” pipe are also available)
Extending Rods and Horizontal Rod - 1/2” electro zinc all threaded rod risers

Maximum Load - 300lbs

The CRE Series is designed for superior support of gas and refrigeration pipes at a higher elevation from the roof surface. The roller allows for longitudinal movements of the pipe. This support is suitable for most types of roofing material or other flat surfaces.

cre_photo cre_drawing

CAT # Pipe Size (OD) Overall Height (H)
to Roller Centre
 Width (W) Length (L) Weight
CRE10-8-3
 Up to 3" Pipe 8" (203mm) 6" (152mm) 9.6" (244mm)
 6.70lbs
CRE10-12-3 Up to 3" Pipe 12" (305mm) 6" (152mm) 9.6" (244mm) 7.10lbs
CR10-4 3" 4" Pipe 8" (203mm) 6" (152mm) 9.6" (244mm) 7.45lbs

Available with a 3" or 4" rubber roller, or a 6" cast iron galvanized roller (except for the CRM)

PDF Download Specifications Sheet
Last Updated on Sunday, 18 September 2011 22:25