Base Only Dimensions: 2 5/8″ High x 12″ wide x 12″” long
Materials: 100% recycled rubber, UV resistant.
Maximum Load: 1,000 lbs.

C-Port CXW Series channel support is designed as an economical support of more heavy-weight gas piping ystems, electrical conduit, HVAC equipment and many other applications. As with the CXP, the CXW is appropriate for many types of roofing material or other flat surfaces. Material effectively accepts screw fasteners for securing one (1) or two (2) hole straps (not included).

The post CXW appeared first on C-Port by Clearline Technologies.

The CREW will love this piece! Designed to support gas and refrigeration lines, this wide-bodied capable C-Port was made to allow  pipe and line mounting  up to 16″ from the roof surface. The wide body, and hardware combined allow for support up to 500lbs!

Dimensions: Base – 12″ Width x 12″ Length
Roller Width – 3″, 4″ or 6″ rollers are available.
Total Height to roller center ranges from 12″ to 16″
Materials: Base – 100% recycled rubber, UV resistant.
Roller: Rubber
Maximum Load: 500lbs.

The post CREW Series appeared first on C-Port by Clearline Technologies.

The CRE Series, also part of the “CR” family allows for support of gas and refrigeration pipes at a higher elevation from the roof surface with the use of galvanized rods.

Dimensions: Base Width 6″ x Length 9.6″
Roller Width – 3″, 4″ or 6″ rollers are available.
Total Height to roller center ranges from 8″ to 12″
Materials: Base – 100% recycled rubber, UV resistant.
Roller: Rubber
Maximum Load: 500lbs.

The post CRE Series appeared first on C-Port by Clearline Technologies.

Just like the CRM Series, the CR series offers support of gas and refrigeration pipes and a heavier load capacity than the CRM version of the C-Port.

Dimensions: Base Width 6″ x Length 9.6″
Roller Width – 3″, 4″ or 6″ rollers are available.
Materials: Base – 100% recycled rubber, UV resistant.
Roller: Rubber

Maximum Load: 500lbs.

The post CR Series appeared first on C-Port by Clearline Technologies.

The CRM series was engineered for superior support of gas and refrigeration pipes / lines. The roller allows for longitudinal movements of the pipe. The CRM provides a less expensive alternative to the larger rolling C-Ports. It is suitable for most types of roofing material or other flat surfaces, and is ideal for smaller pipes.

Dimensions: 4 7/8″ High x 6″ Wide x 9.6″ to 38.5″ Length (base length)
Materials: Base – 100% recycled rubber, UV resistant.
Roller: Rubber.

Maximum Load: 300lbs.

The post CRM Series appeared first on C-Port by Clearline Technologies.

The CZ Seismic Series is a penetrating support fastened to the structure under the membrane. It is ideally designed for hurricane resistance or seismic applications. It is suitable for most types of roofing material or other flat surfaces.

Dimensions: 4 7/8″ High x 6″ Wide x 9.6″ to 38.5″ Length (base length)
Materials: Base – 100% recycled rubber, UV resistant, Strut made of galvanized steel (14ga.) Rods: 1/2″ electro zinc all threaded rod risers.
Bracket: – 14ga. Galvanized Steel. 

Maximum Load: 750 lbs/ft.

The post CZ Seismic Series appeared first on C-Port by Clearline Technologies.

Dimensions: 24” Crossbeam Width x 12” Base Length x 24” to 48” Height (See Chart)
Materials: Base – 100% recycled rubber, UV resistant
Crossbeam and Uprights – 1 5/8” x 1 5/8”, 12 gauge galvanized steel strut
Maximum Load: 600 lbs.

The CESW Series can support gas and refrigeration piping systems, cable tray, electrical conduit, multiple lines, HVAC equipment and many other applications. It is designed for rooftop applications requiring a heavier load bearing, and is suitablefor most types of roofing material or other flat surfaces. The wide bases provide this series with added stability. The CESW Series is suitable for use with one or two pipe hangars (by others).

The post CESW appeared first on C-Port by Clearline Technologies.

The CW Series is designed for superior support of gas and refrigeration piping systems, cable tray, electrical conduit, multiple lines, HVAC equipment and many other applications. The wide body of the base gives this support series superior stability and load-bearing capacity. It is suitable for most types of roofing material or other flat surfaces.

Dimensions: 3.3125″ Height x 12″ Width x Length as specified in chart.
Materials: Base – 100% recycled rubber, UV resistant, Strut made of galvanized steel (14ga.)

Maximum Load: 1000 lbs.

The post CW Series appeared first on C-Port by Clearline Technologies.

CGW Series channel support is designed for superior support of gas and refrigeration piping systems, cable tray, electrical conduit, multiple lines,  HVAC equipment and more. The wide body of the base gives this support series superior stability and load bearing capacity. The Gasket Series can be glued down to the roof, and the rubber mat provides an extra protective barrier between the rubber base and roof surface.

 Dimensions – 3.3125″ Height x 12″ Width x Length as specified in chart.
Rubber Mat: 24″ Wide x Length as specified in chart.
  Material – C-Port base – 100% recycled rubber, UV resistant Strut – 14ga. galvanized steel.

The post CGW Gasket Series appeared first on C-Port by Clearline Technologies.