DSA-Duct Support Series
Outer piece: Dimensions - 1-7/8″ x 1-7/8″
Inner piece: Dimensions – 1-5/8″ x 1-5/8″
Material – 12 Ga. Galvanized Steel
Dimensions: 5-7/8″ x 1-7/8″
Material: 1/4″ Hot rolled, zinc plated carbon steel.
Base Dimensions: 4″ High x 6″ Wide x 9.6″ Length OR 3.3125″ High x 12″ Wide x 12″ Length
Materials: 100% recycled rubber, UV resistant.
Maximum Load: 800-1000 lbs.
C-Port DSA-Duct Support Series is an application designed specifically for ductwork. Telescopic crossbeam allows for easy size adjustments. The bases feature vari-angle C-Ports which adapt to any roof pitch and are made of 100% recycled rubber and 15% recycled metal. C-Ports can be adhered to any roof membrane using approved adhesives (if required).
|Cat. No||Min-Width||Max-Width||Base Length||Weight|
|DSA10-1831||18″ (450mm)||31″ (775mm)||9.6″ (244mm)||39.9lbs.|
|57″ (1425mm)||9.6″ (244mm)||45.1lbs.|
|DSA10-57102||57″ (1425mm)||102″ (2550mm)||9.6″ (244mm)||50.1lbs.|
|DSAW-1831||18″ (450mm)||31″ (775mm)||12″ (305mm)||29.9lbs.|
|DSAW-3157||31″ (775mm)||57″ (1425mm)||12″ (305mm)||35.1lbs.|
|DSAW-3157||57″ (1425mm)||102″ (2250mm)||12″ (305mm)||40.1lbs.|